With the following characteristic.
Voltage
：
220-240V
Wattage
：
25W
Type
：
E14
5
）
Replace the glass cover and reconnect the oven to the mains
Power supply
10
、
INSTALLATION
10.1 Before the Installation
Please check the products shell and make sure that there is no trace caused by striking or heavy load.
The oven door is level, and you can close door flexibly.
Parameter on the nameplate is in compliance with the relevant regulations
When the oven working in a abnormal way, it must be stopped and unplug the power supply until it has
been repaired by a competent person from local agency or factory authorized service.
It is hazardous for anyone other than a competent person to carry out any service or repair operation
10.2 Installation
Only a qualified person in compliance with the instructions provided must install the
appliance .manufacturer declines all responsibility for improper installation, which may harm persons and
animals and damage property.
Important: - The power supply to the appliance must be cut off before any adjustments or maintenance
work is done on it;
- Air duct is supposed to use in Ventilation.
- The ac power supply should be 240 V, 50 Hz, the minimum 15 A distribution circuit fuse, or
at least 15A distribution circuit breaker
10.3 Installation of Built-in Ovens
If we put the oven into cabinet, the material cabinet should be insulated, and the clearance between
the edge of the cabinet and the oven should be over 100mm for ventilation.
