select the desired function,“
”,“
” will light up ,30:00 and 180
℃
will appear on the screen.
-Press “
” to set baking time, use “
” and“
”to increase or decrease baking time (89 minutes and
59 seconds can be set as maximum)
-Press“
”again to set delay time, the delay time symbol “
” will light (For further information about
delay time setting, see point ‘Delay Time Setting’)
-Press “
” to set temperature ,use “
” and “
”to increase or decrease the desired temperature
-Press “
” to start baking
Notice: The delay time is the continuation of clock time. For example, if the current time is 10:00 and you
want appliance start working after 2 hours, you should set delay time at 12:00, Press the“
” key
waiting for confirmation .
7.4 Delay time
When “
” is pressed to define a delayed start time the corresponding light “
” starts to blink.
The screen shows the current time “AUTO”. Press“
” and “
” to set hours, Press“
”again to set
minutes, use “
” and “
” to set minutes,
Press “
” to confirm the delayed start time. After pressing “
”again the appliance starts
working.
Screen shows the delayed start time. Auto and the current time alternately when the appliance is in
standby.
Press “
” for 1 seconds if you want to cancel the selected function.
7.5 Pause in the process of baking
Stop baking and change the parameters
Press the“
” start/pause button, can be in baking process stop baking, at this time can be adjusted
in the process of baking time and temperature.
Press the
“
”
standby function key, enter the function menu selection mode, the choice of function.
Press the
“
”
baking time set key, then press the parameter adjustment increase key
“
”
and
reduce the key
“
”
set cooking time.
Press the
“
”
adjust function keys, switch to baking temperature setting mode;
Press “
”to continue baking.
End baking and cancel the program
In each function after baking, electronic board buzzer “drop, drop, drop” ring 3 sound, screen shows
“End” (End) scintillation display, in 5 minutes intervals of 30 seconds buzzer“drop, drop, drop” ring
3 sound, screen shows “End” has been flashing, 5 minutes after the prototype into standby state; Or
press the “
” start/pause button, prototype into standby mode.
In the setup program or in the working process of the press
“
”
standby function keys 1 seconds, to
stop work and prototype into standby mode, and then press
“
”
, prototype into shutdown state
(screen display only
“
”
)
7.6 Child Lock
Lock
: In waiting state, press “
” for 3 seconds, there will be a long "beep”, denoting entering into the
children-lock state and “
” indicator will light. No matter in any case after lock, screen will always
display “Block” for 3 seconds, and then return to the previous interface
Unlock
: Pressing “
” for 3 seconds in the state of lock, you will hear “beep”. Screen shows the current
time and the symbol “
” light go out.
7.7 Cooling fan system
The appliance is equipped with a cooling system which comes into operation as soon as a baking function
starts. This system will start after temperature has been reached set. Operation of the fans generates a
normal air flow which comes out above the door and may continue for a short time even after the
