4
644
(1)
(2)
820
(3)
M5X16 screw
Back feet
Front feet
Base of the cabinet
Daily Maintenance
It is suggested to clean the product often. Remember to disconnect the power supply
before cleaning.
Then use a wet towel with some neutral detergent to wipe off the stain inside or
outside of the cabinet, and then, use a dry towel to wipe off the remaining detergent.
The common fault and how to handle
Use the M8×60 bolt to fix the “ ” part. Then fix with the linking plate. (The
picture 1).
The install position should keep
enough space for opening the door.
The space landscape orientation
should be more than 820mm (The
picture 2).
If the disinfection cabinet put on the
table, it is needed to install the
supported feet of the cabinet. As the
picture 3: use the M5×16 screw to
fix the front feet and the back feet of
the cabinet.
The common fault and how to handle
Situation
Cause analysis
The socket out of touch
Fuse break down
Power supply line break down
Door control switch break down
Electronic ballast break down
Ozone producer break down
Relays break down
Temperature control break down
Heat pipe break down
Treatment methods
Repair or replace
Repair the fuse
Replace the power supply line
Replace the the door control switch
Replace the electronic ballast
Replace the Ozone producer
Replace the relays
Replace the temperature control
Replace the heat pipe
Fail to work
producer
fail to work
Ozone
Heat pipe
fail to work
