SkyRaider DS287 User Manual
August 19, 2018
SkyRaider DS287 User Manual
Page 161
Left-Click
on the
Looping Icon
to start the
SkyRaider
imaging.
Since
WDM
is only a
Video image
from the
SkyRaider
, you will need to set the
PHD2
Exposure Duration
to a value other than
AUTO
(say
1 second
). This will
NOT
control the actual exposure rate of the SkyRaider, but rather show what the
SkyRaider
has on its video image every
1 second
.
Left-Clicking
on the
Cam
Dialog Box
(see image above) in
PHD2
will open a window where you can adjust
the parameters of the
SkyRaider Camera
(such as the actual
Exposure
, as the
Exposure control
in PHD2 does not control
WDM
driver’s actual exposure, but
rather just
the refresh rate
). It you can, set both the
Actual Exposure
and the PHD
exposure duration
to the same value (experiment).
If you see a rectangular Box in your Window, go to the
ROI Tab
in the
Cam Dialog
Box
, and move and shrink the box to one side of your window so it do
esn’t affect
the image.
Step 10
Step 11
