Rudder Kit Installation
Position the cable clamps. Make sure the vertran lines are aligned with the
gunnal and away from obstacles inside of the kayak. Once the desired
positions are located, drill the pilot holes and put the screws through.
Feed the vectran lines into the
entry holes as indicated.
Reaching inside from the hatch
opening, and guide the vectran
lines to the exit holes.
Pull the vectran lines out from the
exit holes as indicated.
16
13
15
14
OUTSIDE
3
www.malibukayaks.com [email protected] 1-877-952-9257
Malibu Kayaks LLC. all rights reserved.
