Malibu Boats Models 1998 Скачать руководство пользователя | Manualshive

Страница: 29 / 64

background image

2-9

Engine Hours

The engine hours display acts as an odometer for the engine. Engine hours should always
be noted so maintenance and lubricant changes may be performed at proper intervals.

Trip Log

This function displays and allows the reset of the Computron mileage trip log. To reset
the trip log, press the (SR) button.

Set Depth Alarm

This function allows for the setting of the Computron ATD depth alarm. This function is
used to enable an audible alarm that will sound if your boat has ventured into waters that
are at or below the depth that has been set. To change the depth alarm, press the (SR)
button to enter edit mode. The display will begin to blink. Use the (FD) and (FU)
buttons to change the desired depth. You may enter a range between 3 feet and 20 feet.
A setting of “- - - -” will disable the alarm altogether. When finished, press the (SR)
button to save your changes.

Notice:

An “Alarm” on/off switch is located on the control panel. This
switch provides you with the ability to temporarily disable the
audible alarm for the depth meter if you will be operating the
boat in shallow waters for a short period of time.

Tachometer

This function will display a digital readout of the engine RPM.

Set Speed

This function provides the driver with the ability to set a desired speed for the boat. This
function works in conjunction with the graphic speed analyzer display discussed earlier.
To change the desired speed setting, press the (SR) button. The display will begin to
blink. Use the (FU) and (FD) buttons to change the desired speed setting. When
finished, press the (SR) button to save your changes.

Speedometer

This function will present a digital readout of the boat’s current speed. Adjustment of the
speed can be performed using the adjustment knob located on the control panel.

Stop Watch

This function provides competition level skiers with a ten segment digital stopwatch. To
use the stopwatch function, press the (SR) button to reset the stopwatch to zero. When
ready, press the (SS) button to begin the timer on the first segment. Press the (SS) again
to start timing the second segment. You can time up to ten segments by pressing the (SS)
button for each segment. Pressing the (SR) button will stop timing the tenth segment and
will place the stop watch in “Review” mode. While in “Review” mode, pressing the
(FU) and (FD) buttons will allow you to scroll through each of the ten segments. Note
that the stop watch will continue to operate at all times while viewing or changing other
functions and can be stopped at any time by pressing the (SS) button. However, the
stopwatch can only be reset to zero when in the stopwatch function.

«
...
27
28
29
30
31
...
»

Содержание Models 1998

































































Отзывы:

Нет отзывов

Похожие инструкции для Models 1998

Бренд: DeFever Страницы: 36

Бренд: Quicksilver Страницы: 61

KAYAK-BW-01-PK-iKAYAK-RED

Бренд: Bluewave Страницы: 6

Бренд: Boston Whaler Страницы: 98

Бренд: Sea-doo Страницы: 180

Бренд: Sea-doo Страницы: 20

Бренд: Hunter Страницы: 206

Бренд: Baja Страницы: 82

Бренд: Ranger Tugs Страницы: 36

AirFusion AE1040-Y

Бренд: Advanced Elements Страницы: 28

Бренд: Bavaria Страницы: 27

Бренд: Flexboat Страницы: 8

Бренд: Topaz Страницы: 12

Бренд: RS SAILING Страницы: 3

Бренд: RS SAILING Страницы: 13

Бренд: RS SAILING Страницы: 47

Бренд: RS SAILING Страницы: 51

Бренд: RS SAILING Страницы: 57

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды