The unit comes from the factory with the alarm setting programmed to “0”. To change
the alarm depth, press and hold the down arrow of the DISPLAY rocker switch three (3)
seconds or until current depth alarm set point is displayed. Press and hold the up arrow on
the rocker switch to set desired alarm depth. An audible alarm will sound if you travel
within the set alarm depth. No change for three seconds will revert the Depth Gauge to
standard operation.
Feature 4: Air Temperature Display
The Air Temperature feature displays the ambient air temperature and is measured in
degrees Fahrenheit only. No adjustment function is available for this feature.
Feature 5: Lake Temperature Display
The Lake Temperature feature provides lake water temperature, and is measured in
degrees Fahrenheit only. No adjustment function is available for this feature.
Feature 6: Optional Global Position System (GPS) Display
The optional GPS feature has two modes; Compass Mode will aid in determining
geographical location by displaying coordinates of longitude and latitude, and Speed
Mode to set speed based on the coordinate settings.
Compass Mode
Compass Mode is used to give directions in North, South, East and West. The orientation
for this feature is completed at the gauge manufacturer, and no adjustment is necessary.
Speed Mode
Displays the GPS speed with an update rate of once per second.
Speed Auto Cal
The speedometer can be calibrated automatically when the boat speed is between 15 and
36 MPH. To calibrate, select the GPS feature display. Press and hold the down arrow of
the DISPLAY rocker switch for three (3) seconds until “CAL“ is displayed. Continue to
hold button down until the display reads “DONE” or “FAIL”. If the LCD reads “DONE”,
the speedometer will automatically adjust to GPS speed. The LCD reads, “FAIL” for the
following reasons:
1.
GPS speed was not within 15 - 36 MPH.
2.
GPS was not steady ±3 MPH for 3 seconds.
GPS Failure Signals
If the GPS module is attached, but the LCD does not display, there is a problem with the
wiring or module. Please contact your local Malibu dealer for servicing.
If GPS fails during operation, it will display “NORES”, no response. Please contact your
local Malibu dealer for servicing.
If GPS module does not lock on to a GPS signal, the LCD will read “NOSIG”, no signal.
2-4
¤
Содержание Boat 2003
