Malibu Boats 2008 iRide Скачать руководство пользователя страница 57 | Manualshive

Страница: 57 / 112

Malibu Boats 2008 iRide Скачать руководство пользователя страница 57

2-27

Stereo

The stereo head unit is located in the starboard side walk-through
panel (in the shifter panel above the shifter in Ride models). To
turn the stereo on, the dash ignition key switch must be turned on.
The key can be turned to the left if you will not be running the
boat. See Figure 2-31. Some systems, if equipped, will have an
optional remote pad located at the back of the boat either in the
passenger area, or exterior transom. For specific stereo use, please
refer to the stereo manual that was included in your owner’s
packet. Standard on all boats equipped with stereo system is an
MP3 input line. See instructions found in your owner’s packet for
specific use.

If your boat was equipped with optional sound equipment to
include CD changer, amplifier or subwoofer, please refer to these
specific manuals included in the owners’ packet for use.

Stereo Controls

POWER ON/OFF Button (1)

Push the PWR button (1) to turn on the unit. Push it again to turn off the unit.

SEL and VOL Button (2)

1.

Audio control (VOLUME/BASS/TREBLE/BALANCE/FADER)
By quickly pressing the SEL (2) button, you can select which of the below features
to set:

- VOL display - volume control > press button (2)>
- BAS display - bass tone control > press button (2)>
- TRB display - treble tone control > press button (2)>
- BAL display - balance control > press button (2)>
- FAD display - fader control > press button (2)>

Use the VOL up/down button (16) to adjust. In each mode, the waiting time for
adjustment is about 5 seconds. If the waiting time is over, the unit returns to the last
displayed mode of Radio, USB/NAND (internal memory), CDC, iPod, SIRIUS or
CD mode. These settings are indicated on the display window.

Figure 2-33. Stereo Functions

2.

Beep 2nd, I-Vol, Area and DSP Selection
When the SEL button (2) is held over 2 seconds, the unit will be operated as below:

Figure 2-34. Stereo Functions

Beep 2nd

I-Vol

Area

Press

Press

Press

SUB-W

Press

DSP

VOLUME

Select

BASS

Select

TREBLE

Select

FADER

Select

BALANCE

Select

Figure 2-31. Stereo

Figure 2-32. Stereo
Remote

Chapter 2_08.qxd: Chapter 2 doc.qxd 11/12/07 3:32 PM Page 27

«
...
55
56
57
58
59
...
»

Содержание 2008 iRide

















































































































Отзывы:

Нет отзывов