manualshive.com logo in svg

Malibu Boats 2 MXZ, Руководство пользователя

Пользовательский мануал для лодки Malibu 2 MXZ доступен для скачивания бесплатно на manualshive.com. Этот руководство позволит вам безопасно и эффективно использовать вашу лодку. Не забудьте загрузить его прямо сейчас, чтобы быть готовыми к следующей поездке на воду!

Поделиться
Скачать
background image

W-4

Towers are configured with shocks to help stabilize the tower when the tower knobs/bolts
are removed for lowering the tower.

Appropriate care must be taken to ensure the tower is not allowed to fall.

Towers are configured from the factory with shocks based on the factory-installed
components. If ANY additional components are mounted to the tower after the boat
leaves the factory, it is the dealer and the consumer’s obligation to validate that the
installed shocks and the tower are rated for these additional components.

Gelcoat Limited Warranty  

For a period of twenty-four (24) months beginning on the date the boat is purchased by
the first retail purchaser through an authorized Malibu Boats sales facility, or, beginning
on the date the boat was first put into service as a demonstrator or otherwise, whichever
is earlier, Malibu Boats, conditioned on the owner having provided maintenance and care
as described in the Malibu Boats Owner’s Manual will repair substantial manufacturing
defects related to materials or workmanship supplied by it in applying the Gelcoat finish
to the boat. This Gelcoat Limited Warranty shall not include gelcoat finish, blistering,
discoloration, fading or osmosis as well as damage due to in-water storage without
proper barrier coat and bottom paints.  

The Gelcoat Limited Warranty is Not Transferable.

Lifetime Hull Limited Warranty  

For the life of the boat, Malibu Boats will repair substantial manufacturing defects
related to structural materials or structural workmanship supplied by it during the
construction of the hull, deck, liner, stringer or upholstery frame.  

All repairs performed by Malibu Boats, or its authorized service facilities, will be
performed using either new or re-manufactured parts. Malibu Boats may, at its option,
install parts which have similar or greater performance characteristics if an identical
replacement part is no longer available. Repairs will be warranted only for the remainder
of the original warranty period. 

In addition to Malibu Boats Limited Warranty, your boat also comes with other limited
warranties provided by the engine and trailer manufacturers, among other items.  Please
refer to their limited warranty disclosures for details, including their terms, conditions
and limitations.

  What “Is Not” Covered by the Malibu Boats Limited
  Warranty

The following are 

NOT

covered under the Malibu Boats Limited Warranty:

•    Normal maintenance of boat, or any component thereof  
•    Normal wear and tear of boat, or any component thereof 
•    Damages caused by defects in materials, components or parts not supplied by Malibu

Boats 

Содержание 2 MXZ















































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 2 MXZ

BRP Sea-Doo FT Series Operator'S Manual preview
Sea-Doo FT Series
Бренд: BRP Страницы: 212
Robo Marine Indonesia GEOMAR User Manual preview
GEOMAR
Бренд: Robo Marine Indonesia Страницы: 28
Cramar Taxi 32 Tana Owner'S Manual preview
Taxi 32 Tana
Бренд: Cramar Страницы: 18
NRS CATCH THE ADVENTURE SLIPSTREAM 120 Quick Start Manual preview
CATCH THE ADVENTURE SLIPSTREAM 120
Бренд: NRS Страницы: 6
Bayliner 245 Cruiser Owner'S Manual preview
245 Cruiser
Бренд: Bayliner Страницы: 80
Sea-doo 1998 GTX RFI 5666 Operator'S Manual preview
1998 GTX RFI 5666
Бренд: Sea-doo Страницы: 26
Malibu Boats 1982 Owner'S Manual preview
1982
Бренд: Malibu Boats Страницы: 68
Malibu Boats 2000 Owner'S Manual preview
2000
Бренд: Malibu Boats Страницы: 60
Malibu Boats 2009 21 vRide Owner'S Manual preview
2009 21 vRide
Бренд: Malibu Boats Страницы: 132
Nacra F20 Carbon Assembly & Rigging Manual preview
F20 Carbon
Бренд: Nacra Страницы: 69
buster LX Owner'S Handbook Manual preview
LX
Бренд: buster Страницы: 203
S2 Yachts 8.0 B Owner'S Manual preview
8.0 B
Бренд: S2 Yachts Страницы: 43
Zodiac NZO 600 Owner'S Manual preview
NZO 600
Бренд: Zodiac Страницы: 270
udir/c UDI021 Operation Manual preview
UDI021
Бренд: udir/c Страницы: 12
BENETEAU SWIFT TRAWLER 47 Owner'S Manual preview
SWIFT TRAWLER 47
Бренд: BENETEAU Страницы: 252
Ranger boats RT Series Owner'S/Operator'S Manual preview
RT Series
Бренд: Ranger boats Страницы: 36
West Marine AE3031 Owner'S Manual preview
AE3031
Бренд: West Marine Страницы: 20
BENETEAU Boat User Manual preview
Boat
Бренд: BENETEAU Страницы: 178

Бренды по названию

Популярные бренды

Загрузить еще бренды