Malatech SUNSTONE TRAVELLER PRO 1500, Руководство пользователя

Страница: 7 / 17

USER INSTRUCTIONS
ATTENTION! The right and the
left brackets are different, please
care to attach the correct pieces!
4. Plug the solar panel’s cable port
to the light cable’s port Depending
on country the product can be
supplied with single or identical
dual cables & ports. In case of
single cables, please attach the
2 ports correctly. In case of dual
identical cables please care to
plug them correctly as shown
above.
5. Turn on the light by pressing
the ON/OFF button one time. A
red indicator light at the light’s
end where the motion sensor
is located at shows you that the
operation has been completed
successfully. The default lighting
mode is 50% power + 100% power
upon motion sensor signal, and
the operation is controlled by the
light sensor. You can customize
your light’s operation by the
Magic Remote Control unit.
Fixing points of the solar panel
Fixing points of the mounting
angle adjusting beam. You find
multiple holes on both the
horizontal stand bracket, as
well as on the solar panel holder
bracket. These holes are for the
adjustment of the angle, you are
free to set up however you prefer
according to your region, and
season (typical ideal setup is app.
45 degrees).
Connection point of the solar
panel holder, and the horizontal
stand bracket.



4
5
3. Assembling the solar
panel console
7