Malatech SUNSTONE TRAVELLER PRO 1500, Руководство пользователя

Страница: 6 / 17

USER INSTRUCTIONS
the console holes according to that. Drill the holes for the screws. Please
use fixing equipment (screws, anchors if necessary) suitable for the chosen
surface material. The package contains 4 screws and anchors for fixing the
consoles, but since the chosen surface can be made of various materials,
the fixing equipment must be chosen for the appropriate material type!
The supplied screws and anchors for fixing the light consoles are not
obligatory to use since the correct fixing method & equipment are surface
dependent. ATTENTION! The light has a decent weight, non-suitable
fixing method could result that the light falls from the surface, which
may cause damage to the light, and a source of danger for human health.
2. After fixing the consoles on
the surface correctly, place
the tightening screws in both
consoles, and fix the light on the
consoles.
3. Place the washer and the nut on
the end of the screw, and tighten
it by your hand. Then hold the nut
with a suitable wrench to prevent
it from rotation while you drive
the screw with a screwdriver
at the other end. ATTENTION!
These screws fix the light on the
console. Care to tighten them
correctly! Do not remove the
screws just in case you would like
to remove the light later on! Do
not overtighten the screws!
2
3
6