background image

1. 

After receiving your light, please open the light’s box gently with paying 

attention not to cause harm to the light and its parts.

2. 

Before starting to use your light, please make sure that there are no 

visible damages on the light and its parts.

3. 

If you observe breaking, crack, fracture on the light or on its parts, 

please do not use the product, but contact us for replacement.

4. 

Please do not apply strong physical force on the product that can 

damage the light or its parts. Non-ordinary use of the product results 

the loss of product warranty.

5. 

Please keep the box, the packaging material, and the content out of the 

reach of children, and pets. There are small objects among the parts 

of the light, which children or pets can ingest, or can cause harm to 

themselves with.

6. 

Please do not disassemble the light, do not bend the light, or 

apply  physical  stress  on  the  light.  Please  follow  the  user  manual’s 

instructions for installation, and operation. 

7. 

Do not expose the light to higher heat than natural caused by weather 

changes. Excessive heat may damage more constituents of the light.

8. 

Do  not  expose  the  light  to  continuous  high-  or  low-pressure  water 

flow, even if you intend to clean your light. The IP65 protection does 

not mean you can put the light in water, or you can wash the light with 

continuous water stream. The next chapter declares the right method 

of cleaning.

9. 

Please always contact Malatech Water, Ltd, or a professional appointed 

by our company if you intend to disassemble the light, remove any 

of its parts, or service the light. Service attempts made by users are 

prohibited, and result the loss of product warranty.

For  preserving  the  aesthetical  outlook,  and  maintaining  the  maximum 

functionality, and efficiency of your light, cleaning is recommended from 

time to time. Since the light is operated by solar energy, keeping the solar 

panel  clean  &  free  of  dust  is  key-essential  to  ensure  its  efficiency,  and 

maximize  discharging  time.  Please  follow  the  instructions  below  when 

cleaning your light:

USER INSTRUCTIONS, INFORMATION

CLEANING INSTRUCTIONS

9

Содержание EMERALD PRO INDUSTRY
















Отзывы: