1.
Please always use a suitable, soft, and damp towel for cleaning the
solar panel
2.
Apply the towel with higher water content for the first time at each
cleaning procedure to remove the majority of dust preferably with one
movement.
3.
After washing the towel in continuous water stream to remove the
accumulated dust, squeeze the water out of the towel, and remove
the remainder of dust with the towel gently from the surface of the
solar panel if necessary. Care to avoid scratching the surface of the
solar panel.
4.
If you observe scaling, or other accumulated dirt on the surface of the
solar panel, please only use a chemical or natural enzymatic based
agent for cleaning which is recommended for solar panel cleaning by
its manufacturer.
5.
Cleaning of the plastic and metal parts of the light body can be
executed easily, but attention is needed to avoid scratching of the
surfaces.
6.
Cleaning the dome which protects the LED group from external effects
also requires cautious approach for cleaning to avoid scratching.
Please apply chapter 1)-4) above for the dome as it is written in case
of the solar panel.
The light recognizes low battery voltage, and switches off automatically
to prevent the battery from damage, and to maximize the life cycle of the
battery. Besides that, the light applies an eco-mode when the battery
level is low but sufficient for operation. In this case the light will shine at
a dimmed mode.
Please charge your light whenever any of the above
written occurs!
The WEEE (Waste Electrical and Electronic Equipment) sign
means that every electrical, and electronic wastes must
be collected, and treated separately. According to The
Waste Electrical and Electronic Equipment Directive (WEEE
Directive), the European Community Directive 2012/19/EU
on waste electrical and electronic equipment (WEEE) which, together with
the RoHS Directive 2011/65/EU lights, and light bodies are electrical, and
AUTOMATIC BATTERY PROTECTION
WASTE DISPOSAL
10
Содержание EMERALD PRO INDUSTRY
Страница 2: ...2 ...
