Malaguti MISSION 125, Инструкция по эксплуатации

Страница: 13 / 32

Mission 125 / 200 13
BORDWERKZEUG
The maintenance information and the on-board tools
supplied help to carry out preventive maintenance and
minor repairs. However, certain maintenance requires
special tools.
HINWEIS
• The safety and condition of the vehicle
depend on proper maintenance, regular
inspections and the necessary adjustment
and lubrication of various components.
• On the following pages you will find the
relevant instructions.
• Maintenance, replacement or repair of the
exhaust system may only be carried out by
an authorised specialist dealer in accordance
with the respective legal requirements.
WARNUNG
• Leave maintenance work that affects the
warranty claim or with which you are not
familiar to an authorised specialist dealer.
• Modifications to the vehicle that have not been
approved by the manufacturer can lead to a
change in performance, non-permitted exhaust
emission values and unsafe driving behaviour.
• If such modifications are carried out by the
customer without authorisation from the
manufacturer, the warranty claim will be
invalidated.
SPARK PLUG
SPARK PLUGS MISSION 125/200
Manufacturer: NGK
Model: PMR9B
Electrode gap 0.6 - 0.7 mm
Tightening torque 12 Nm
The spark plug is an important part of the engine
and is easy to check. Heat and deposits wear out
the spark plug, so it must be checked according to
the maintenance table. The spark plug also gives an
indication of the condition of the engine. The spark
plug is located on the underside of the vehicle.
Check spark plug
Remove the spark plug connector (1).
1
Unscrew the spark plug with the spark plug spanner
(2) of the on-board tool.
MAINTENANCE & SERVICING