Malaguti CENTRO SO 4T, Руководство по обслуживанию

Страница: 21 / 62

20 07/08
50 cc - 4 T
NUMBER PLATE LIGHT
Light bulb 12V - 5W (W5W)
To check that a light bulb (C ) is properly
functioning, position the light switch,
which is located on the right control panel,
in the center position and turn the key to
the starting position.
Light bulb replacement
• Remove the number plate light (F),
unscrew the screws (V).
• Remove the rubber lamp holder from the
plastic cover.
• Replace the light bulb.
• Reposition the lamp holder and remount
the cover.
When performing the operations
described above, be very careful
not to damage the near by parts
(transmission, cables, gaskets,
etc.).
F. 31
F
V
F. 30
C
Tail light
• Take out the lamp holder from inside the headlight.
• Replace the light bulb.
• Reposition the rubber lamp holder (pressure) and remount the cover.
Stop light and turn signal light
• Remove the coloured hood that is held by two hooks.
• Replace the light bulb.
• Reposition the coloured hood and remount the cover.
When performing the operations described above, be very careful to not
damage the near by parts (transmission, cables, gaskets, etc.).
• Disconnect the connector
(C).
• Remove the parabolic spring
carefully.
F. 29
C