15
07/08
50 cc - 4 T
CHECKING THE REAR BRAKE
• Make sure that the idle stroke of the lever is ~ 10 mm.
• Ad just the lever by means of the adjuster (A), if necessary.
F. 17
F. 16
FORK
CHECK OIL LEVEL IN THE
FORK LEG
• Remove the fork leg.
If a "limit switch" of the fork
is found, or if they produce
abnormal sounds, the oil level
inside the pins must be
checked. Removal of the legs
can be seen in F. 18.
• Insert a ruler or gauge and
check that the oil is at least
75 mm from the upper edge
of the leg.
• If necessary, top up with oil:
FORK OIL
CHANGE FORK OIL
• Place an appropriate drip pan under the slider and remove the screws (V).
• Drain out as much oil as possible.
• Proceed to dismantle the fork legs, as previously described.
• Turn the fork legs upside-down, to let the remaining oil drain out.
Hydraulic oil is corrosive and may cause personal injury.
Do not improperly dispose of used oil in the environment.
• Remount the drain screw (V).
NOTE - When remounting, replace the copper washer located under the screw (V).
• Check the oil level, as previously described.
• Reassemble the fork components and the fork on the motorcycle.
• Carefully pour the "new" oil in the fork.
V
17 ± 15%
Quantity per fork 90 cc.
F. 18
V
A
Содержание CENTRO SO 4T
