4
1.1 Unpacking and Inspection
Great care should be taken when unpacking the equipment. Be sure to verify the contents shown on
the packing list and inspect the equipment for any loose parts or other damage. All packing material
should be preserved in the event that any damage occurred during shipping. Any claims for shipping
damage should be filed to the carrier. Any claims for missing equipment or parts should be filed with
MALÅ Geoscience.
1.2 Repacking and Shipping
If original packing materials are unavailable, the equipment should be packed with at least 80 mm of
absorbing material. Do not use shredded fibres, paper wood, or wool, as these materials tend to get
compacted during shipment and permit the instruments to move around inside the package.
1.3 MALÅ Geoscience Indemnity Clause
Operators of MALÅ MIRA system or other GPR systems shall hold harmless, defend, and indemnify
MALÅ Geoscience from and against any and all losses, liabilities, damages, injuries, claims, demands,
costs and expenses or claims including claims by third parties arising out of the use or possession of
the MALÅ MIRA GPR system.
1.4 Important information regarding the use of this GPR unit
According to the regulations stated in ETSI EN 302 066-1 (European Telecommunication Standards
Institute):
-
The control unit should not be left ON when leaving the system unintended. It
should always be turned OFF when not in use.
-
The antennas should point towards the ground, walls etc. during measurement
and not towards the air.
-
The antennas should be kept in close proximity to the media under
investigation.
