15
4
Connect the encoder cable from the wheel to the antenna.
Note:
The precision of the encoder wheel depends on several factors, such as; the condition of
measurement surface, the pressure applied on the wheel and possible wear.
Warning:
When using MALÅ Easy Locator, the wheel calibration must be changed to the appropriate
wheel, enter the
Settings Menu
on the Easy Locator Controller and change the
Acquisition Parameters
to the correct wheel.
5
Power up
Start the Easy Locator Pro by pressing the power button on both the HDR antenna and the Easy
Locator Controller.
To turn the antenna and monitor off, first select
QUIT
from the
Main Menu
, confirm the action by
selecting
YES
then push the power button on the monitor and release quickly.
Note:
The antenna will automatically turn off when the monitor is powered down.
Note:
If a power cable is accidentally pulled out, the Easy Locator Pro
components will start
automatically when reconnected.
