www.malags.com
33
activate the kill-switch). The use of a kill switch function makes the antenna
stop emitting electro-magnetic waves when the switch is released. Note
that it’s advisable to continue with the next line within 10 seconds to avoid
any time drifts of the signal. The CX system will work in the following
manner:
- By default the Kill-switch is always OFF and transmitting is always
enabled.
- If Kill-switch is ON and a High Frequency antenna connected, the
black button on the antenna has to be held down to enable
measurements. When realizing this button the transmitting will stop
within 9 seconds.
- When pressing black button on the antenna again, the measurement
can continue, and the antenna is transmitting. It should be noted that
if the antenna has been off for a longer time period, it can be
necessary to let the antenna get warm (by pressing black button for
a time) before starting the measurements.
If the
Filter button
is set to
visible, the General Settings
menu (see also Chapter 2) will
get an extra option, Filters.
When pressing Filters the
following screen appears:
