5
1 Safety Regulations
Read all instructions in this manual. Failure to follow all instructions listed below may result in
personal injury and equipment damage. WARNING: When using electrical equipment, always follow
the safety precautions to reduce risk of fire, electric shock and personal injury. The manufacturer
declares that they are not liable for damages to person(s) or object(s) which may be caused by
failure to comply with the safety regulations.
1.1 Workspace
• Keep the work surface clean. Disorganized surfaces and areas are an invitation, for accidents in
the work place.
• Do not use the saw in hazardous environments. Do not use the machine in places that are damp,
wet, exposed to rain, or in the presence of flammable liquids or gases. Keep your work area well
lit.
• Visitors must be kept at a safe distance from the workspace. Take the appropriate precaution by
using padlocks or following the appropriate lock-out-tag procedures.
1.2 Electrical Safety
• Ensure that your power supply is in accordance with the rating of the machine. A 10% increase
or decrease in voltage will cause power loss and overheating. All Maksiwa equipment is factory
tested. If this Machine does not operate properly, first check the power supply.
• The BMS.3200.IR is constructed with two separate layers of electrical insulation. You do not have
to ground the machine if the power supply comes built with an ground.
• NOTE: Double insulation is not a substitute for normal safety precautions when operating this
machine. The insulation system is to add protection against personal accidents resulting from a
possible failure of the machines electrical insulation.
• CAUTION: WHEN SERVICING OR REPAIRING THE MACHINE, ONLY USE OEM PARTS.
• The plug used for the machine must be rated for the correct voltage/Amps and compatible with
the electrical outlet. Never modify the plug.
•
Do not use any adapter plugs. Using the correct plug (without modifications) with the correct
outlet will reduce the risk of electrical shock.
1 Safety Regulations
