Glossary
Contents
Central Management System
Page 21 of 45
VLAN Trunk can only be assigned to one LAN port.
Regular LANs with a VLAN ID set only have the VLAN ID tagged when going through the
VLAN Trunk. That is, they are untagged on their normal ports.
DHCP Attributes:
If DHCP has been enabled for this LAN port.
Type: currently only one type is available, Trivial File Transfer Protocol
(TFTP). Enter the Value for the DHCP attribute, for example the IP or
hostname of the TFTP server and click Add to bind this DHCP attribute to
the port.
Save when finished.
5.5.3 Other considerations
Please take careful note of all caution messages. These messages will vary depending on the situation.
You need to be aware of these messages and amend the situation if possible.
5.6
Configure > Network >
Port Setup
Here you configure how you would like your networks distributed across the various ports.
The following diagrams are for illustrative purposes, and may differ from your specific CPE.
You can also merge the separated ports to operate as a bridged network, creating one logical LAN with 2
ports.
The Port Setup page is only visible if your CPE model has more than 1 port available for
configuration.
Merging, separating or rearranging LAN ports will remove the settings for each LAN
included in the change.
