CAUTION:
This tool is designed for indoor use only. Using this tool for prolonged periods
may cause it to overheat and malfunction. Use inside a confined area, such as a cabinet etc.
will increase the temperature of the tool.
To ensure the tool does not overheat it is suggested frequent breaks are taken to allow the tool
to cool down fully.
A fire may result if the appliance is not used with care, therefore:
be careful when using the appliance in places where there are combustible materials;
do not apply to the same place for a long time;
do not use in presence of an explosive atmosphere;
be aware that heat may be conducted to combustible materials that are out of sight;
place the appliance on its stand after use and allow it to cool down before storage;
do not leave the appliance unattended when it is switched on.
MAINTENANCE & CLEANING:
Before any work is performed on the Heat Gun, ensure that it is unplugged from the power
outlet.
For optimum use, regularly check to see if any dust or foreign matter has entered the
ventilations slots near the motor and around the on/off switch. Use a soft brush if required.
Wear safety glasses to protect your eyes whilst cleaning.
If the body of the tool needs cleaning, wipe it with a soft damp cloth. A mild detergent can be
used but never alcohol, petrol or other cleaning agents. Never use caustic agents to clean
plastic parts.
Any repairs to the tool must be carried out by authorised persons only.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
CAUTION:
Water must never come into contact with this power tool.
DISPOSAL:
Do not dispose of electrical appliances with your domestic waste!
Dispose of it in your
local recycling containers, or at your local recycling station.
TECHNICAL DATA
HEAT GUN
SROM1180
Voltage Rating
230-240V,50Hz
Speed I: 1350W Speed II: 2000W
Temperature (typ.)
400ºC / 600ºC
