![background image](http://html2.mh-extra.com/html/makita/xwt19/xwt19_instruction-manual_5177311002.webp)
2 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
XWT07 XWT07XV XWT08 XWT08XV XWT19 XWT19XV XWT09 XWT09XV
Fastening capacities
Standard bolt
M12 - M30 (1/2″ - 1-1/4″)
M12 - M24 (1/2″ - 1″)
High tensile bolt
M10 - M24 (3/8″ - 1″)
M10 - M22
(3/8″ - 7/8″)
Square drive
19 mm (3/4″)
12.7 mm (1/2″)
–
Drive shank
–
11.1 mm (7/16″) Hex.
No load speed (RPM)
Hard impact mode
0 - 1,800 /min
0 - 2,000 /min
0 - 1,800 /min
Medium impact mode
0 - 1,000 /min
Soft impact mode
0 - 900 /min
Impacts per minute
Hard impact mode
0 - 2,200 /min
0 - 2,400 /min
0 - 2,200 /min
Medium impact mode
0 - 2,000 /min
Soft impact mode
0 - 1,800 /min
Overall length
229 mm (9″)
223 mm (8-3/4″)
229 mm (9″)
Rated voltage
D.C. 18 V
For use near high-voltage electrical power lines
-
-
-
-
Net weight
3.4 - 3.7 kg
(7.5 - 8.2 lbs)
3.3 - 3.6 kg
(7.3 - 8.0 lbs)
3.1 - 3.4 kg
(6.8 - 7.5 lbs)
3.5 - 3.8 kg
(7.7 - 8.4 lbs)
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi
-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
Charger
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH / DC18WC
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above.
Use of any other battery cartridges
and chargers may cause injury and/or fire.
SAFETY WARNINGS
General power tool safety warnings
WARNING
Read all safety warnings, instruc-
tions, illustrations and specifications provided with
this power tool.
Failure to follow all instructions listed
below may result in electric shock, fire and/or serious
injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1.
Keep work area clean and well lit.
Cluttered or
dark areas invite accidents.
2.
Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust.
Power tools create sparks
which may ignite the dust or fumes.
3.
Keep children and bystanders away while
operating a power tool.
Distractions can cause
you to lose control.
Electrical safety
1.
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools.
Unmodified plugs and matching outlets will
reduce risk of electric shock.