background image

10 

The fastening torque is affected by a wide variety of 
factors including the following. After fastening, always 
check the torque with a torque wrench. 

1.

When the battery cartridge is discharged almost
completely, voltage will drop and the fastening
torque will be reduced. 

2. 

Driver bit or socket bit 
Failure to use the correct size driver bit or socket
bit will cause a reduction in the fastening torque. 

3.

Bolt

• 

Even though the torque coefficient and the
class of bolt are the same, the proper
fastening torque will differ according to the
diameter of bolt. 

• 

Even though the diameters of bolts are the
same, the proper fastening torque will differ
according to the torque coefficient, the class
of bolt and the bolt length.

4.

The manner of holding the tool or the material of
driving position to be fastened will affect the
torque. 

5.

Operating the tool at low speed will cause a
reduction in the fastening torque. 

MAINTENANCE 

CAUTION: 

• 

Always be sure that the tool is switched off and the 
battery cartridge is removed before attempting to
perform inspection or maintenance except for the
following troubleshooting related to the light. 

• 

Never use gasoline, benzine, thinner, alcohol or
the like. Discoloration, deformation or cracks may
result. 

To maintain product SAFETY and RELIABILITY, repairs, 
any other maintenance or adjustment should be 
performed by Makita Authorized Service Centers, 
always using Makita replacement parts. 

OPTIONAL ACCESSORIES 

CAUTION: 

• 

These accessories or attachments are
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or
attachment for its stated purpose. 

If you need any assistance for more details regarding 
these accessories, ask your local Makita Service Center. 

• 

Screw bits

• 

Socket bits

• 

Hook 

• 

Plastic carrying case 

• 

Makita genuine battery and charger 

• 

Bit-piece 

• 

Battery protector 

• 

Tool hanger 

NOTE: 

• 

Some items in the list may be included in the tool
package as standard accessories. They may differ
from country to country.

Learn more about 

power drills and drivers

 on our website.

Содержание XST01Z











Отзывы: