7
Playing audio files in Bluetooth
mode
When you have successfully connected the speaker with
the chosen Bluetooth device you can start to play your
music using the controls on your connected Bluetooth
device.
1.
2.
3.
Note:
1.
2.
Speaker memory and reconnecting
a device
The speaker can memorize up to 8 sets of paired device,
when the memory exceed this amount, the oldest pairing
history will be over written. If your Bluetooth device
already paired with the speaker previously, the unit
will memorize your Bluetooth device and it attempts
to reconnect with a device in memory which is last
connected. If the last connected device is not available,
the speaker will be discoverable.
Disconnecting your Bluetooth
device
Press and hold the Bluetooth pairing button for 2-3
seconds to disconnect with your Bluetooth device. The
Bluetooth indicator flashes in blue indicating the speaker
is discoverable again for pairing.
Playing music via auxiliary input
socket
A 3.5mm Auxiliary input socket is provided on the right
side of the unit to permit an audio signal to be fed into the
unit from any devices that features a headphone or audio
output, such as an iPod, MP3 or CD player.
1.
2.
3.
Note:
When Aux in socket is connected an audio device,
Bluetooth function will be disabled to minimize power
consumption.
Once playing has started adjust the volume to the
required setting using the Volume buttons on
the speaker or on your enabled Bluetooth device.
When you press the Volume up/down button,
the volume indicator will flash in fast flashing red. If
the indicator light in solid red, it indicates the volume is
in maximum volume or minimum volume.
Use the controls on your device to play/pause and
navigate tracks. Alternatively, control the playback
using Play/Pause ( ), Next track ( ) , Previous
track buttons ( ) on the speaker.
Press and hold the Next track ( ) or Previous
button ( ) to fast-forward/Rewind the current track.
Release the button when the desired point in the track is
reached.
That not all player applications or devices may
respond to all of these controls.
Some mobile phones may temporarily disconnect from
the speaker when you make or receive calls. Some
devices may temporarily mute their Bluetooth audio
streaming when they receive text messages, emails or
for other reasons unrelated to audio streaming.Such
behaviour is a function of the connected device and
does not indicate a fault with the speaker.
Connect a stereo or mono audio source (for example,
iPod, MP3 or CD player) to the Auxiliary input socket
(marked 'AUX') and the Aux in indicator turns green
indicating the speaker is in auxiliary input mode.
Adjust the Volume control on your iPod, MP3 or CD
player to ensure an adequate signal and then adjust
the volume on the speaker for comfortable listening.
To have the better sound quality, we recommend
setting the volume to more than two-thirds level on
your audio device and then adjust the volume on the
speaker as required.
search for the speaker, it will show its availability on
both devices. However, if one device links with this
unit first, then the other Bluetooth device won't find it
on the list.
If your Bluetooth device is temporarily disconnected
to the speaker, then you need to manually reconnect
your device again to the speaker.
If ‘XRM08” shows in your Bluetooth device list but your
device cannot connect with it, please delete the item
from your list and pair the device with the speaker
again following the steps described previously.
The effective operation range between the system and
the paired device is approximately 10 meters (30 feet).
Any obstacle between the system and the device can
reduce the operational range.
Bluetooth connectivity performance may vary
depending on the connected Bluetooth devices.
Please refer to the Bluetooth capabilities of your
device before connecting to the speaker. All features
may not be supported on some paired Bluetooth
devices.
2.
3.
4.
5.
