13 ENGLISH
Using the quick mode-switching function
When the tool is in the mode that is not registered, press the quick mode-switching button to switch to the registered
application mode. The tool switches between the registered application mode and last application mode every time
you press the quick mode-switching button. The front lamps on both sides will flash once when switching to the regis
-
tered application mode.
The lamp of the registered application mode will blink when using the registered application mode.
Erasing the registered application mode
Press and hold the button and
button at the same time until all impact force grade lamps blink.
NOTE:
After erasing the registered application mode, the quick mode-switching button works for changing the
impact force.
Indication patterns
Application mode
While registering the application mode When the registered application mode
turns on
4 (Max)
3 (Hard)
2 (Medium)
1 (Soft)
Wood mode
Bolt mode
T mode (1)
T mode (2)
: The lamp is on.
: The lamp is blinking.
