Makita XCV03, Инструкция по эксплуатации, Страница: 7 / 44

7
1 2 1 2
015674
Press the check button to make the battery
indicators show the remaining battery
capacities. The battery indicators
correspond to each battery.
Remaining battery capacity indication
B atter y i nd i cator status
Rema i n i ng batter y capac i t y
50 % - 100 %
20 % - 50 %
0 % - 20 %
C harge the batter y
O n O ff
Bli n ki ng
015527
Indicating the remaining battery
capacity
(Only for battery cartridges with "B" at the
end of the model number.)
1
2
015676
Press the check button on the battery cartridge
to indicate the remaining battery capacity. The
indicator lamps light up for few seconds.
O ff Bli n ki ng Li ghted
I nd i cator l amps
C harge the
batter y.
0 % to 25 %
25 % to 50 %
50 % to 7 5 %
7 5 % to 100 %
Rema i n i ng
capac i t y
T he batter y
ma y ha v e
ma l funct i oned .
015658
NOTE:
•
Depending on the conditions of use and
the ambient temperature, the indication
may differ slightly from the actual capacity.
Switch action
1
2
3
015529
To start the cleaner:
1. Set the stand-by switch to the "I" side.
The cleaner gets into stand-by state.
2. Press the power button.
To make the cleaner get into stand-by
mode, press the power button again.
To turn off the cleaner, set the stand-by
switch to the "O" side.
The suction power can be adjusted
according to your work need.
Suction power can be increased by turning
the suction force adjusting knob from the
symbol to the symbol.
NOTICE:
•
Always set the stand-by switch to the
"O" side when not using the cleaner for
long time. The cleaner consumes
power during stand-by state.
1. Stand-by switch
2. Power button
3. Suction force
adjusting knob
1. Indicator lamps
2. Check button