Makita XBU07, Инструкция по эксплуатации

Страница: 7 / 24

7 ENGLISH
Installing or removing the dust bag
Hook the claw of the dust bag to the hook of the main
unit, then hook the front side of the handle of the dust
bag to the main unit, and then pull up the rear side of
the handle until handle snaps into place as shown in
the figure.
3
1
2
Fig.4
►
1.
Claw
2.
Handle
3.
Dust bag
To remove the dust bag, perform the installation proce-
dure in reverse.
Installing or removing the wide
nozzle
Optional accessory
Insert the wide nozzle with its protrusions facing up into
the nozzle.
1
Fig.5
► 1. Protrusion
Attaching the shoulder strap
CAUTION:
When you use the machine in com-
bination of the backpack-type power supply such
as portable power pack, do not use the shoulder
harness included in the machine package, but use
the hanging band recommended by Makita.
If you put on the shoulder harness included in the
machine package and the shoulder harness of the
backpack-type power supply at the same time,
removing the machine or backpack-type power supply
is difficult in case of an emergency, and it may cause
an accident or injury. For the recommended hanging
band, ask Makita Authorized Service Centers.
CAUTION:
Be sure to attach the hooks of
the shoulder strap to the machine securely. If the
hooks are attached incompletely, they may come off
and cause an injury.
CAUTION:
Be sure to use the shoulder strap
dedicated to this machine. Using other shoulder
strap may cause an injury.
Attach the hook of the shoulder strap to the machine as
shown in the figure.
1
Fig.6
► 1. Hook