![background image](http://html2.mh-extra.com/html/makita/vr004g/vr004g_instruction-manual_5177232012.webp)
12
ENGLISH
If the coupling does not reach or fit securely onto the
male thread of the tool, especially when installing a long
flexible shaft, pull the outer casing further towards the
tool while hand-turning the flexible core shaft so the
shaft top well fits into the shaft slot in the vibration head
and becomes fully engaged.
1
2
Fig.20
►
1.
Outer casing
2.
Flexible core shaft
5.
Knock each of the three corners of triangular
coupling with a hammer a few times in random order to
secure assembly.
Fig.21
Uninstallation
Follow the installation steps in reverse order.
Installing shoulder strap
Optional accessory
WARNING:
Always remove the shoulder strap
from the tool while wearing portable power packs.
Wearing multiple harnesses and straps may impair
the chances to take the equipment off quickly in a
case of emergency and result in personal injury.
WARNING:
Do not use the parts for attaching
the shoulder strap for other purposes, such as
the fall prevention at high location.
If the parts
for attaching the shoulder strap are used for other
purposes, excessive load may break them and cause
serious injury to the operator and person around/
underneath the operator.
CAUTION:
Be sure to attach the hooks of the
shoulder strap to the tool securely.
If the hooks are
attached incompletely, they may come off and cause injury.
CAUTION:
Be sure to use the shoulder strap
dedicated to this tool.
Using other shoulder strap
may cause an injury.
Hang the hooks of the shoulder strap over the hanging
holes on top of the tool.
1
2
3
Fig.22
►
1.
Shoulder strap
2.
Hook
3.
Hanging hole
OPERATION
CAUTION:
Put the shoulder strap on the
shoulder, and hold the tool firmly with both
hands.
NOTICE:
At the very beginning of operation, the
flexible shaft tends to vibrate at a higher ampli
-
tude. The tool will restore the normal amplitude
after you squeeze and release the switch trigger a
few times repeatedly.
Make sure to throw in and keep the vibration head
stand straight during operation. Use the tool within the
effective vibration ranges at equidistant intervals. The
effective air bubble removal range is approximately ten
times the diameter of vibration head.
Fig.23
Содержание VR004G
Страница 15: ...15...