6
1
013479
2.
When connecting an electric power tool, secure
the power supply cord and hose by the hose
bands at regular distance. It prevents the hose
from entangling the power supply cord.
3.
Rotate the switch lever to the "AUTO" position.
4. Move the suction force adjusting knob to the
position suitable for the input power of the electric
power tool you intend to use.
5. Switching on and off of the connected electric
power tool simultaneously brings the cleaner
switching on and off action. The cleaner still
works for a few seconds even after the electric
power tool is switched off.
6. After use, disconnect the power tool from the
socket of cleaner.
7.
Switch off the cleaner after use.
Auto-suction stop during suction operation
WARNING:
•
Do not pick up foam or soapy liquid.
Picking up
foam or soapy liquid can cause foam to come out
of air exit before the auto-suction stop works.
Continuing to using in this condition may cause an
electric shock and breakage of the cleaner.
The cleaner has a mechanism that prevents water from
immersing into the motor when picking up more than a
certain amount of water.
When the tank is full with liquid, the cleaner emits long
warning beep. Switch off the cleaner and empty the tank
when this beep sounds.
Usage of base hook
CAUTION:
•
Be careful not to pinch your fingers when
closing the base hook.
Failure to do so may
cause personal injury.
NOTICE:
•
Do not apply an excessive force on the base hook.
The excessive force on the base hook may
damage the base hook. Close the base hook
when not in use.
Opening the base hook allows the following usage.
1.
Storing the power supply cord
1
2
013461
NOTICE:
•
Do not use the cleaner or a connected electric
power tool with a power supply cord wound on
the base hook.
Using the cleaner or the
connected electric power tool with power supply
cord may cause damage the power supply cord.
2.
Storing the front cuffs
1
013373
Front cuffs 22, 24 and 38 can be stored (up to two at a
time).
3.
Storing the hose
1
013480
4.
Resting a reasonable size of electric power
tool for the base hook, such as circular saw.
013481
1. Hose
1. Front cuffs
1. Base hook
2. Power supply
cord
1. Hose band
