Makita VC2201M Series Скачать руководство пользователя страница 7

CAUTION: 

• 

Do not apply a great impact on the air filter and 
tank. Applying a great impact may cause 
deformation and damage to air filter and tank. 

• 

Empty the tank at least once a day although this 
depends on picked-up dust volume in the tank. Or, the 
suction force will weaken and the motor may be broken. 

• 

Do not grab the hook when emptying the tank. 
Grabbing the hook may cause the hook to break. 

1

2

 

 

015693 

Unhook and lift up the tank cover. 

   

013483 

Take the polyethylene bag out of the tank. 

 

NOTE: 

• 

Take the polyethylene bag carefully out of the tank 
so that the polyethylene bag cannot be caught and 
torn by the protrusion inside the tank when 
emptying it. 

• 

Empty the polyethylene bag before it becomes full. 
Too much dust in the tank may cause the 
polyethylene bag to be torn. 

Connecting a hose 

 

CAUTION: 

• 

Never force the hose for bending or stamp it. 
Never move the cleaner by a hose. Forcing, 
stamping and pulling the hose may cause a 
breakage or deformation of the hose. 

• 

When picking up large wastes such as planer 
carvings, concrete dusts or similar other than 

small wastes, use the 38 mm inner diameter hose 
(optional accessory). Using the 28 mm inner 
diameter hose may cause a hose stuffing and 
damage. 

• 

Always put the cap on the mounting port whenever 
you remove the hose from the tool. 

1

 

 

015694 

Remove the cap from the mounting port. You can place 
the cap in multi hook while the hose is connected to the 
tool. 

   

015695 

Insert the hose onto the mounting port of the tank and 
turn it clockwise until it locks. 

OPERATION 

 

WARNING: 

• 

Always use a P2-respirator. 

CAUTION: 

• 

If foam or liquid escapes from the tool, switch off 
immediately. Continuing to using in this condition 
may cause an electric shock and breakage of the 
cleaner. 

MAINTENANCE 

 

WARNING: 

• 

Always use a P2-respirator during performing 
maintenance. 

CAUTION: 

• 

Always be sure that the tool is switched off and 
unplugged before attempting to perform inspection 
or maintenance. 

• 

Never use gasoline, benzine, thinner, alcohol or 
the like. Discoloration, deformation or cracks may 
result. 

1. Cap 

1. Tank cover 
2. Hook 

Содержание VC2201M Series













Отзывы: