Makita UT 1200, Руководство по ремонту

Страница: 6 / 9

【
Tips of Repair
】
While Pressing fit a bearing, do not press outer race. It may cause extraordinary noise and
rotational motion fault. The correct way is to press inner race at equal power.
UT1200
III. Assembly of Mixer
At first Connect the intermediate wire of pair of brushes (2) to the motor (1) and place the
motor in right half of motor housing (3) Please make sure that silicone plug (4) is replaced
in the hole of motor housing (3) .After this, insert the intermediate shaft (27) with
assembled intermediate wheel (26) and the two ball bearings 6003 2RS.
20
18
28
28
2
3
1
P 6 / 9