Makita UT 1200, Руководство по ремонту

Страница: 4 / 9

Now you are able to see switch (10) , anti-parasite condenser (11) , and line cord (12) , two self-tapping
screws (13) and wire locking flange (14) .
2. Disassembly of Gearing Section
To disassemble gear, prepare Round bar and one set of V-Block (1R258) . Press down work spindle
(20) with round bar in drilling direction. During this procedure, please take off the intermediate wheel
(26)
To remove grooved ball bearing 6003 2RS (28) , make sure to hang the nails of bearing extractor
(1R269) on the side of grooved ball bearing.
Round Bar
Arbor Press
26
20
Bearing Extractor
28
10
11
13
14
P 4 / 9