Makita UR360D, Инструкция по эксплуатации

Страница: 8 / 16

8
Speed change
1
012862
Two speed ranges can be preselected with the speed
change switch.
Flipping the speed change switch lever to the "1" position
will set the tool to the low speed range and the "2"
position will set the tool to the high speed range.
Battery/motor protection system
The battery cartridge and tool are provided with
protection functions that will automatically reduce or cut
off power when overload situations occur that may cause
damage to the tool or battery cartridge.
If the tool becomes overloaded but not locked up, a
protector is provided to reduce the revolutions to protect
the motor. In this case the two indicator lamps described
in the table below do not light or blink.
All other protection functions can be identified by the
indicator lights described in the table below.
1
012967
Statu s
B li n ki ng
Li ght i ng O n
- Li ght i ng O n
-
Battery power ha s b een
near l y u s ed up .
Battery protector is
s hutt i ng o ff the power -
b attery power ha s b een
u s ed up .
-
-
A ct i on to b e ta k en
R ep l ace the b attery w i th f u ll y charged one .
R ep l ace the b attery w i th f u ll y charged one .
R e s t the e q u i pment f or a wh il e .
B li n ki ng
Ov er l oad protector is s hutt i ng
o ff the power - the motor wa s
l oc k ed .
B li n ki ng B li n ki ng
El ectr i c or e l ectron i c
ma lf unct i on
Ask your l oca l author iz ed s er vi ce center f or
repa i r s.
Ov erheat protector is s hutt i ng
o ff the power - o v erheat i ng .
R e l ea s e the s w i tch tr i gger and remo v e the
cau s e o f the motor l oc k or o v er l oad . If the
cutt i ng too l is l oc k ed b y entang li ng weed s or
the lik e , a l way s remo v e the b attery cartr i dge
b e f ore c l ear i ng i t .
010823
Nylon cutting head
NOTICE:
•
Do not attempt to bump feed the head while the tool
is operating at a high RPM. Bump feeding at a high
RPM may cause damage to the nylon cutting head.
•
The bump feed will not operate properly if the head
is not rotating.
1
012863
1. Most effective
cutting area
1. Indicator lamps
1. Speed change
switch lever