Makita UR360D, Инструкция по эксплуатации

Страница: 2 / 16

2
ENGLISH (Original instructions)
SPECIFICATIONS
Model UR360D / BUR360
High 0 - 7,000 min
-1
No load speed
Low 0 - 5,100 min
-1
Overall length 1,720 mm
Cutting diameter with nylon cutting head 300 mm
Net weight 5.1 kg
Rated voltage D.C. 36 V
Standard battery cartridge(s)
Warning: Use only the battery cartridge(s) described.
BL3622A / BL3626
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
END020-1
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
읭
Take particular care and attention.
읭
Read instruction manual.
읭
Danger; be aware of thrown objects.
읭
The distance between the tool and
bystanders must be at least 15 m.
읭
Keep bystanders away.
읭
Keep distance at least 15 m.
읭
Wear a helmet, goggles and ear
protection.
읭
Wear protective gloves.
읭
Wear sturdy boots with nonslip soles.
Steeltoed safety boots are
recommended.
읭
Do not expose to moisture.
읭
Top permissible tool speed.
읭
Never use metal blade.
읭
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
ENG905-1
Noise
The typical A-weighted noise level determined according
to EN786:
Sound pressure level (L
pA
) : 82 dB(A)
Sound power level (L
WA
) : 90 dB(A)
Uncertainty (K) : 0.4 dB(A)
Wear ear protection
ENG904-1
Vibration
The vibration emission value determined according to
EN786:
Vibration emission (a
h
) : 5.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
ENG901-1
•
The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
•
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
•
The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Cd
Ni-MH
Li-ion