21 ENGLISH
Speed adjusting
You can select the tool speed by tapping the main power button. Each
time you tap the main power button, the level of speed will change.
►
Fig.10:
1.
Speed indicator
2.
Main power button
Speed indicator
Mode
Rotation speed
High
6,500 min
-1
Medium
5,300 min
-1
Low
3,500 min
-1
Automatic Torque Drive Technology
When you turn on the Automatic Torque Drive
Technology (ADT), the tool runs at optimum rotation
speed and torque for the condition of grass being cut.
To start ADT, press and hold the reverse button until the ADT indicator
turns on. After that, tap the main power button to select the cutting tool
attached to the tool. Light the lamp beside
marking to select cut-
ter blade and plastic blade,
marking to select nylon cutting head.
To stop ADT, press and hold the reverse button until the
ADT indicator turns off.
►
Fig.11:
1.
marking
2.
marking
3.
ADT indica-
tor
4.
Main power button
5.
Reverse button
Indicator
Mode
Cutting tool
Rotation
speed
ADT(Cutter
blade)
Cutter blade
Plastic blade
3,500 - 6,500
min
-1
ADT(Nylon
cutting head)
Nylon cutting
head
3,500 - 6,500
min
-1
Reverse button for debris removal
WARNING:
Switch off the tool and remove the
battery cartridge before you remove entangled weeds
or debris which the reverse rotation function can not
remove.
Failure to switch off and remove the battery cartridge
may result in serious personal injury from accidental start-up.
This tool has a reverse button to change the direction of rotation.
It is only for removing weeds and debris entangled in the tool.
To reverse the rotation, tap the reverse button and pull
the switch trigger while depressing the lock-off lever when
the cutting tool is stopped. The speed indicators and
ADT indicator start blinking, and the cutting tool rotates in
reverse direction when you pull the switch trigger.
To return to regular rotation, release the trigger and wait
until the cutting tool stops.
►
Fig.12:
1.
Speed indicator
2.
ADT indicator
3.
Reverse button
NOTE:
During the reverse rotation, the tool operates only
for a short period of time and then automatically stops.
NOTE:
Once the tool is stopped, the rotation returns
to regular direction when you start the tool again.
NOTE:
If you tap the reverse button while the cutting
tool is still rotating, the tool comes to stop and to be
ready for reverse rotation.
Electric brake
This tool is equipped with an electric brake. If the tool
consistently fails to quickly stop after the switch trigger
is released, have the tool serviced at our service center.
CAUTION:
This brake system is not a substitute for
the protector. Never use the tool without the protector.
An
unguarded cutting tool may result in serious personal injury.
Electronic function
Constant speed control
The speed control function provides the constant rota-
tion speed regardless of load conditions.
Soft start feature
Soft start because of suppressed starting shock.
ASSEMBLY
WARNING:
Always be sure that the tool is
switched off and battery cartridge is removed
before carrying out any work on the tool.
Failure to
switch off and remove the battery cartridge may result
in serious personal injury from accidental start-up.
WARNING:
Never start the tool unless it is
completely assembled.
Operation of the tool in a
partially assembled state may result in serious per-
sonal injury from accidental start-up.
Installing the handle
For UR016G
1.
Insert the shaft of the handle into the grip. Align the screw
hole in the grip with the one in the shaft. Tighten the screw securely.
►
Fig.13:
1.
Grip
2.
Screw
3.
Shaft
NOTICE:
Note the direction of the grip. The
screw holes will not be aligned if the grip is not
inserted in the correct direction.
2.
Adjust the handle position, and then tighten the
knob to fix the handle.
►
Fig.14:
1.
Knob
For UR017G
1.
Attach the upper and lower clamps on the damper.
2.
Put the handle on the upper clamp and fix it with
hex socket head bolts as illustrated.
►
Fig.15:
1.
Hex socket head bolt
2.
Handle
3.
Upper
clamp
4.
Damper
5.
Lower clamp
Содержание UR016G
