Makita UH4261, Техническая информация

Страница: 5 / 9

[3] DISASSEMBLY/ASSEMBLY
[3] -3. Armature and Switch
Fig. 15
Fig. 17
Fig. 16
Fig. 18
DISASSEMBLING
ASSEMBLING
(1) Remove Shear blade complete and Helical gear 67. (Refer to pervious pages.)
(2) Switches, Switch lever A / C and Switch arm can be removed. (
Fig. 15 )
(3) Remove Brush holders, and then separate Armature with Bearing box
complete from Housing L. (
Fig. 16 )
Note : Carbon brushes can be removed without removing Brush holders.
(4) Remove Bearing box complete from Armature using 1R269. ( Fig. 17 )
(5) Remove Ball bearings 627ZZ and 6000ZZ from Armature shaft using
1R269.
(Fig.17)
Take the disassembling step in reverse.
Note
: Align the groove of Switch arm with the vertical line of Housing L
against the bottom line. (
Fig. 18)
Bearing box complete
Bearing box
complete
Ball bearing
6000ZZ (under
Armature fan)
Armature
Ball bearing
627ZZ
1R269
Carbon brushes
Brush holders
vertical line of Housing L
the bottom line
of Housing L
Switch lever A
Switch
Switch
Switch lever C
Switch arm
Housing L
The groove of Switch arm
must be at vertical position.
R
epair
P 4/ 7