Makita UH4261, Техническая информация

Страница: 3 / 9

[2] LUBRICATION
[1] NECESSARY REPAIRING TOOLS
DISASSEMBLING
Fig. 1
Fig. 4 Fig. 5 Fig. 6
Fig. 2 Fig. 3
Fig. 7 Fig. 8
Code No. Description
1R035 Bearing setting plate 15.2 Removing Helical gear 67
1R269 Bearing extractor Removing Bearing box complete
Use for
Protector
Pin 4
Helical gear 67
Pliers
Front grip
Front
grip
Housing R
Plane bearing 8
Flat washer 8
Spindle
Spindle
Screws (2pcs.)
Shift Front grip ends out.
Housing L
Shear blade complete
Helical gear 67
CAUTION: Repair the machine in accordance with “Instruction manual” or “Safety instructions”.
R
epair
Apply Makita grease N. No.2 to the following portion to protect parts and product from unusual abrasion.
(1) Gear room (5g: Refer to
Fig. 6 .)
(2) Crank portion of Shear blade complete (2g: Refer to Fig. 8 )
(3) Contact portion of Spindle bottom end and Plan bearing 8 (a little: Refer to Fig . 8 )
(1) Turn the machine upside down and keep it in a horizontal position using Front handle. ( Fig. 1 )
(2) Remove two Screws and Protector. ( Fig. 1 )
(3) Remove two Screws on Front grip ( Fig. 2 ) and then push both ends of Front grip with Switch lever B. ( Fig. 3)
Front grip with Switch lever B can be separated from Housing set.
(4) Remove fourteen Screws and Housing R (
Fig. 4 )
(5) Remove Pin 4 (2pcs) from Shear blade complete. ( Fig. 5 )
(6) Turn Helical gear 67 to the direction of Blade top, and Helical gear 67 itself and Blade crank portion will rise up
from the original position.(
Fig. 6 )
Note
:
Use Blade cover and gloves when you hold Shear blade complete so as not to pinch your finger.
(7) Remove Plane bearing 8 and Flat washer 8 from Spindle. (
Fig. 7)
Shear blade complete and Nylon sleeve 5 (2pcs) can be removed from Spindle and Helical gear 67. ( Fig. 8)
Switch
lever B
Both ends
of Front
grip
portion
Screws
(2pcs.)
Shear
blade
complete
Shear blade
complete
Nylon sleeve 5 (2pcs.)
Tapping screw 4x18
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Shear blade complete and Front grip
P 2/ 7