9 ENGLISH
17.
Adjust the length of the blower nozzle so that
the air stream can work close to the ground.
18.
If the blower strikes any foreign objects or
should start making any unusual noise or
vibration, immediately switch off the blower
to stop it. Remove the battery cartridge, and
inspect the blower for damage before restart-
ing and operating the blower. If the blower
is damaged, ask Makita Authorized Service
Centers for repair.
19.
Do not insert fingers or other objects into
suction inlet or blower outlet.
20.
Prevent unintentional starting. Ensure the
switch is in the off-position before inserting
battery cartridge, picking up or carrying the
blower. Carrying the blower with your finger
on the switch or energizing the blower that has
the switch on invites accidents.
21.
Never blow dangerous materials, such as
nails, fragments of glass, or blades.
22.
Do not operate the blower near flammable
materials.
23.
Avoid operating the blower for a long time in
low temperature environment.
24.
Before assembling or adjusting the machine,
switch off the motor and remove the battery
cartridge.
25.
Wear the personal protective equipments
before starting the motor.
26.
Before starting the motor, inspect the machine
for damages, loose screws/nuts or improper
assembly. Check all control levers and
switches for easy action. Clean and dry the
handles.
27.
Never attempt to start the motor if the machine
is damaged or not fully assembled.
28.
Adjust the shoulder harness and hand grip to
suit the operator's body size.
29.
During operation, use the shoulder harness.
Keep the machine on your right side firmly.
►
Fig.2
30.
Hold the front handle with the left hand and the
rear grip with the right hand, no matter you are
right-hander or left-hander. Wrap your fingers
and thumbs around the handles.
31.
Never attempt to operate the machine with one
hand. Loss of control may result in an injury.
32.
If the machine gets heavy impact or fall, check
the condition before continuing work. Check
the controls and safety devices for malfunc-
tion. If there is any damage or doubt, ask our
authorized service center for the inspection
and repair.
33.
Follow the instruction manual of the power
unit for proper use of the power unit.
34.
Refer to the instruction manual of the power
unit for how to start and control the machine.
35.
During operation, never stand on an unstable
or slippery surface or a steep slope. During
the cold season, beware of ice and snow and
always ensure secure footing.
36.
Do not use the machine in bad weather where
visibility is limited.
Failure to do so may cause
fall or incorrect operation due to low visibility.
37.
Do not use the machine when there is a risk of
lightning.
Transportation
1.
Stop the motor during transportation.
Otherwise unintentional start-up may cause injury.
Vibration
1.
Exposing to excessive vibration injures blood
vessels or nervous system of the operator and
causes the following symptoms in the fingers,
hands or wrists: “Falling asleep” (numbness),
tingling, pain, stabbing sensation, alteration of
skin color or of the skin. If any of these symp-
toms occur, see a physician.
To reduce the risk of “white finger disease”,
keep your hands warm during operation and
well maintain the machine and accessories.
Maintenance and storage
1.
Keep all nuts, bolts and screws tight to be sure
the blower is in safe working condition.
2.
If the parts are worn or damaged, replace them
with parts provided by Makita.
3.
Store the blower in a dry place out of the reach
of children.
4.
When you stop the blower for inspection, ser-
vicing, storage, or changing accessory, switch
off the blower and make sure that all moving
parts come to a complete stop, and remove the
battery cartridge. Cool down the blower before
making any work on the blower. Maintain the
blower with care and keep it clean.
5.
Always cool down the blower before storing.
6.
Do not expose the blower to rain. Store the
blower indoors.
7.
When you lift the blower, be sure to bend your
knees and be careful not to hurt your back.
8.
Always clean dust and dirt off the equipment.
Never use gasoline, benzine, thinner, alcohol
or the like for the purpose.
Discoloration, defor
-
mation or cracks of the plastic components may
result.
9.
Do not attempt any maintenance or repair not
described in this instruction manual or the
instruction manual of the power unit. Ask our
authorized service center for such work.
10.
Follow instructions for lubricating and chang-
ing accessories.
11.
Always use the genuine spare parts and acces-
sories only.
Using parts or accessories supplied
by a third party may result in the equipment break
-
down, property damage and/or serious injury.
12.
Request our authorized service center to
inspect and maintain the machine at regular
interval.
13.
Before storing the machine, perform full clean-
ing and maintenance. Remove the battery
cartridge.
14.
Do not prop the equipment against something,
such as a wall.
Otherwise it may fall suddenly
and cause an injury.
Содержание UB402MP
