9 ENGLISH
1
2
3
4
Fig.2
►
1.
Blower pipes
2.
Hose clamp
3.
Flexible pipe
4.
Screw
3.
Clamp the control cable to the cable holder.
1
2
Fig.3
►
1.
Cable holder
2.
Control cable
NOTE:
Adjust the control cable tension comfortably
with the cable holder according to your control handle
position. Disengage the control cable from the cable
holder, if necessary, to release tension.
Installing blower nozzles
Attach one of blower nozzles supplied with the machine
to the middle pipe.
1
2
1
1
Fig.4
►
1.
Nozzles
2.
Middle pipe
Align the arrow mark on a nozzle with those on the
middle pipe. Then slide the nozzle onto the front end of
the middle pipe until the projection on the middle pipe is
engaged with the cutout groove on the nozzle.
1
2
3
4
5
Fig.5
►
1.
Nozzle
2.
Middle pipe
3.
Arrow marks
4.
Projection
5.
Cutout groove
To remove the nozzle, turn the nozzle either to the left
or to the right to disengage the lock. Then slide the
nozzle off the middle pipe.
1
2
Fig.6
►
1.
Nozzle
2.
Middle pipe
Adjusting blower pipes lengths
The blower pipes can be extended to the desired
lengths according to your needs.
Loosen the lock ring by turning it in the direction shown