Makita UB004C Скачать руководство пользователя страница 6

6 ENGLISH

15. 

It is recommended to use the long nozzle so 

the air stream can work close to the ground.

16. 

If the blower strikes any foreign objects or 

should start making any unusual noise or 

vibration, immediately switch off the blower 

to stop it. Remove the battery cartridge from 

the blower and inspect the blower for damage 

before restarting and operating the blower. If 

the blower is damaged, ask Makita Authorized 

Service Centers for repair.

17. 

Do not insert fingers or other objects into 

suction inlet or blower outlet.

18. 

Prevent unintentional starting. Ensure the 

switch is in the off-position before inserting 

battery cartridge, picking up or carrying the 

blower. Carrying the blower with your finger 

on the switch or energizing the blower that has 

the switch on invites accidents.

19. 

Never blow dangerous materials, such as 

nails, fragments of glass, or blades.

20. 

Do not operate the blower near flammable 

materials.

21. 

Avoid operating the blower for a long time in 

low temperature environment.

22. 

Do not use the machine when there is a risk of 

lightning.

23. 

When you use the machine on muddy ground, 

wet slope, or slippery place, pay attention to 

your footing.

24. 

Do not use the machine in bad weather where 

visibility is limited.

 Failure to do so may cause 

fall or incorrect operation due to low visibility.

25. 

Do not submerge the machine into a puddle.

26. 

Do not leave the machine unattended outdoors 

in the rain.

27. 

Do not use the machine in the snow.

28. 

During operation, keep the cord away from 

obstacles. The cord caught by obstacles may 

cause serious injury.

Maintenance and storage

1. 

Keep all nuts, bolts and screws tight to be sure 

the blower is in safe working condition.

2. 

If the parts are worn or damaged, replace them 

with parts provided by Makita.

3. 

Store the blower in a dry place out of the reach 

of children.

4. 

When you stop the blower for inspection, ser-

vicing, storage, or changing accessory, switch 

off the blower and make sure that all moving 

parts come to a complete stop, and remove the 

battery cartridge. Cool down the blower before 

making any work on the blower. Maintain the 

blower with care and keep it clean.

5. 

Always cool down the blower before storing.

6. 

Do not expose the blower to rain. Store the 

blower indoors.

7. 

When you lift the blower, be sure to bend your 

knees and be careful not to hurt your back.

8. 

When washing the machine, do not let water 

enter the electrical mechanism such as bat-

tery, motor, and terminals.

9. 

When storing the machine, avoid direct sun-

light and rain, and store it in a place where it 

does not get hot or humid.

10. 

When carrying the machine, be sure to hold 

the machine firmly by holding the handle of 

machine.

11. 

When carrying the machine, be careful not to 

get the cord caught by obstacles.

Battery tool use and care

1. 

Recharge only with the charger specified by 

the manufacturer.

 A charger that is suitable for 

one type of battery pack may create a risk of fire 

when used with another battery pack.

2. 

Use power tools only with specifically desig

-

nated battery packs.

 Use of any other battery 

packs may create a risk of injury and fire.

3. 

When battery pack is not in use, keep it away 

from other metal objects, like paper clips, 

coins, keys, nails, screws or other small metal 

objects, that can make a connection from one 

terminal to another.

 Shorting the battery termi

-

nals together may cause burns or a fire.

4. 

Under abusive conditions, liquid may be 

ejected from the battery; avoid contact. If con-

tact accidentally occurs, flush with water. If 

liquid contacts eyes, additionally seek medical 

help.

 Liquid ejected from the battery may cause 

irritation or burns.

5. 

Do not use a battery pack or tool that is dam-

aged or modified.

 Damaged or modified batteries 

may exhibit unpredictable behaviour resulting in 

fire, explosion or risk of injury.

6. 

Do not expose a battery pack or tool to fire or 

excessive temperature.

 Exposure to fire or tem

-

perature above 130 °C may cause explosion.

7. 

Follow all charging instructions and do not 

charge the battery pack or tool outside the 

temperature range specified in the instruc

-

tions.

 Charging improperly or at temperatures 

outside the specified range may damage the 

battery and increase the risk of fire.

Electrical and battery safety

1. 

Do not dispose of the battery(ies) in a fire.

 

The cell may explode. Check with local codes for 

possible special disposal instructions.

2. 

Do not open or mutilate the battery(ies).

 

Released electrolyte is corrosive and may cause 

damage to the eyes or skin. It may be toxic if 

swallowed.

3. 

Do not charge battery in rain, or in wet 

locations.

4. 

Do not charge the battery outdoors.

5. 

Do not handle charger, including charger plug, 

and charger terminals with wet hands. 

6. 

Do not replace the battery with wet hands.

7. 

Do not replace the battery in the rain.

8. 

Do not wet the terminal of battery with liquid 

such as water, or submerge the battery. Do not 

leave the battery in the rain, nor charge, use, 

or store the battery in a damp or wet place.

 If 

the terminal gets wet or liquid enters inside of bat-

tery, the battery may be short circuited and there is 

a risk of overheat, fire, or explosion.

9. 

After removing the battery from the machine or 

charger, be sure to store it in a dry place.

Содержание UB004C

























Отзывы: