Makita TW001GD201 Скачать руководство пользователя страница 6

Страница: 6 / 92

6 ENGLISH

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to EN62841-2-2:

Work mode: impact tightening of fasteners of the maxi-

mum capacity of the tool

Vibration emission (a

) : 18.5 m/s

Uncertainty (K) : 2.0 m/s

NOTE:

The declared vibration total value(s) has been

measured in accordance with a standard test method

and may be used for comparing one tool with another.

NOTE:

The declared vibration total value(s) may also

be used in a preliminary assessment of exposure.

WARNING:

The vibration emission during actual

use of the power tool can differ from the declared val

ue(s) depending on the ways in which the tool is used

especially what kind of workpiece is processed.

WARNING:

Be sure to identify safety mea-

sures to protect the operator that are based on an

estimation of exposure in the actual conditions of

use (taking account of all parts of the operating

cycle such as the times when the tool is switched

off and when it is running idle in addition to the

trigger time).

EC Declaration of Conformity

For European countries only

The EC declaration of conformity is included as Annex A

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING:

Read all safety warnings, instruc-

tions, illustrations and specifications provided

with this power tool.

Failure to follow all instructions

listed below may result in electric shock, fire and/or

serious injury.

Save all warnings and instruc-

tions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Cordless impact wrench safety

warnings

Hold the power tool by insulated gripping

surfaces, when performing an operation

where the fastener may contact hidden wiring.

Fasteners contacting a "live" wire may make

exposed metal parts of the power tool "live" and

could give the operator an electric shock.

Wear ear protectors.

Check the impact socket carefully for wear,

cracks or damage before installation.

Hold the tool firmly.

Keep hands away from rotating parts.

Do not touch the impact socket, bolt, nut or the

workpiece immediately after operation.

They

may be extremely hot and could burn your skin.

Always be sure you have a firm footing.

Be sure no one is below when using the tool in

high locations.

The proper fastening torque may differ

depending upon the kind or size of the bolt.

Check the torque with a torque wrench.

Make sure there are no electrical cables, water

pipes, gas pipes etc. that could cause a hazard

if damaged by use of the tool.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity

with product (gained from repeated use) replace

strict adherence to safety rules for the subject

product.
MISUSE or failure to follow the safety rules stated

in this instruction manual may cause serious

personal injury.

Important safety instructions for

battery cartridge

Before using battery cartridge, read all instruc-

tions and cautionary markings on (1) battery

charger, (2) battery, and (3) product using battery.

Do not disassemble or tamper with the battery

cartridge.

It may result in a fire, excessive heat,

or explosion.

If operating time has become excessively

shorter, stop operating immediately. It may

result in a risk of overheating, possible burns

and even an explosion.

If electrolyte gets into your eyes, rinse them

out with clear water and seek medical atten-

tion right away. It may result in loss of your

eyesight.

Do not short the battery cartridge:

(1)

Do not touch the terminals with any con-

ductive material.

(2)

Avoid storing battery cartridge in a con-

tainer with other metal objects such as

nails, coins, etc.

(3)

Do not expose battery cartridge to water

or rain.

A battery short can cause a large current

flow, overheating, possible burns and even a

breakdown.

Do not store and use the tool and battery car-

tridge in locations where the temperature may

reach or exceed 50 °C (122 °F).

Do not incinerate the battery cartridge even if

it is severely damaged or is completely worn

out. The battery cartridge can explode in a fire.

Do not nail, cut, crush, throw, drop the battery

cartridge, or hit against a hard object to the

battery cartridge.

Such conduct may result in a

fire, excessive heat, or explosion.

Do not use a damaged battery.

Содержание TW001GD201





























































































Результаты поиска

Содержание TW001GD201

Отзывы:

Похожие инструкции для TW001GD201

Бренды по названию

Популярные бренды

Makita TW001GD201, Инструкция по эксплуатации

Результаты поиска

Содержание TW001GD201

Отзывы:

Похожие инструкции для TW001GD201

Бренды по названию

Популярные бренды