20 ENGLISH
To install the battery cartridge;
1.
Pull up the locking lever upward, and then open
the battery cover.
►
Fig.14:
1.
Locking lever
2.
Battery cover
2.
Align the tongue on the battery cartridge with the
slot on the machine, and then slide the cartridge until it
locks in place with a little click.
►
Fig.15:
1.
Battery cartridge
3.
Close the battery cover and push it until it is
latched with the locking lever.
To remove the battery cartridge;
1.
Pull up the locking lever and open the battery
cover.
2.
Pull out the battery cartridge from the machine
while sliding the button on the front of the cartridge.
►
Fig.16:
1.
Battery cartridge
3.
Close the battery cover.
Battery check button
You can check the remaining battery capacity by press
-
ing the battery check button.
►
Fig.17:
1.
Battery indicator
2.
Battery check button
Battery indicator status
Remaining
battery
capacity
On
Off
Blinking
50% to 100%
20% to 50%
0% to 20%
NOTE:
The indicator lamp for remaining battery
capacity is just for a reference. The actual battery
capacity may differ depending on the usage condi
-
tions or ambient temperature.
NOTE:
While the machine is in operation, the indica
-
tor lamp does not light up even if you press the check
button.
NOTE:
The lamp automatically goes off after a few
seconds.
NOTE:
If two battery cartridges are installed, the
battery installed on the right side is used first.
NOTE:
If two battery cartridges are installed, the
machine automatically switches the battery when the
battery in use becomes empty.
Indicating the remaining battery
capacity
Press the check button on the battery cartridge to indi
-
cate the remaining battery capacity. The indicator lamps
light up for a few seconds.
►
Fig.18:
1.
Indicator lamps
2.
Check button
Indicator lamps
Remaining
capacity
Lighted
Off
Blinking
75% to 100%
50% to 75%
25% to 50%
0% to 25%
Charge the
battery.
The battery
may have
malfunctioned.
NOTE:
Depending on the conditions of use and the
ambient temperature, the indication may differ slightly
from the actual capacity.
NOTE:
The first (far left) indicator lamp will blink when
the battery protection system works.
Machine/battery protection system
The machine is equipped with a machine/battery
protection system. This system automatically cuts off
power to the motor to extend machine and battery life.
The machine will automatically stop during operation if
the machine or battery is placed under one of the fol
-
lowing conditions:
Overload protection
When the machine or battery is operated in a manner
that causes it to draw an abnormally high current,
the machine automatically stops and the main power
lamp blinks in green. In this situation, turn the machine
off and stop the application that caused the machine
to become overloaded. Then turn the machine on to
restart.
Overheat protection
When the machine is overheated, the machine stops
automatically and the main power lamp lights up in red.
In this case, let the machine and battery cool before
turning the machine on again.
NOTE:
The main power lamp blinks in red when the
battery is overheated.
Содержание PM001G
