![background image](http://html.mh-extra.com/html/makita/mktnxcs01t1/mktnxcs01t1_instruction-manual_1722860005.webp)
5
ENGLISH
(Original instructions)
Explanation of general view
SPECIFICATIONS
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions.
Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1.
Keep work area clean and well lit.
Cluttered or dark
areas invite accidents.
2.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools
create sparks which may ignite the dust or fumes.
3.
Keep children and bystanders away while
operating a power tool.
Distractions can cause you
to lose control.
Electrical safety
4.
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools.
Unmodified plugs and matching outlets will
reduce risk of electric shock.
5.
Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric
shock if your body is earthed or grounded.
6.
Do not expose power tools to rain or wet
conditions.
Water entering a power tool will increase
the risk of electric shock.
7.
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts.
Damaged or entangled cords increase
the risk of electric shock.
8.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
Use of a
cord suitable for outdoor use reduces the risk of
electric shock.
9.
If operating a power tool in a damp location is
unavoidable, use a ground fault circuit interrupter
(GFCI) protected supply.
Use of an GFCI reduces
the risk of electric shock.
1.
Red indicator
2.
Button
3.
Battery cartridge
4.
Star marking
5.
Switch Lock
6.
Switch trigger
7.
Side A
8.
Side B
9.
Protector
10. Hold Bolt
11. Rebar
12. Blades
13. More than 200 mm
14. Air Hole
15. Hex Wrench
16. Return Valve
17. Blade A (Thicker Blade)
18. Blade B (Thicker Blade)
19. Bolt (Longer)
20. Bolt (Shorter)
21. Washer
22. Bar Holder
23. Cutter Rod
24. Blade A on Bar Holder
25. Blade B on Cutter Rod
26. Spare Blades
27. Limit mark
28. Rear cover
29. Screws
30. Arm
31. Spring
32. Recessed part
33. Carbon brush cap
34. Hole
Model
XCS01
Max. Cutting Capacity (Dia.mm)
3/4" (#6)
Grade 40 - Grade 60
Grade 40: Tensile Strength 490 N / mm
2
70,000 PSI
Grade 60: Tensile Strength 620 N / mm
2
90,000 PSI
Cutting speed
6.5 seconds
Overall length
412 mm (16-1/5")
Net weight
10.6 kg (23.4 lbs)
Rated voltage
D.C. 18 V