![background image](http://html.mh-extra.com/html/makita/maktec-mt241/maktec-mt241_technical-information_232411005.webp)
Fig. 7
[3] DISASSEMBLY/ASSEMBLY
[3]-3. Vise section
DISASSEMBLING
Vise section is fixed to Base as follows.
* at Screw guide with two M8x30 Pan head screws
* by interlocking of Shoulder pin 10-16 with the guide groove on Base
(1) Make Screw guide free from Base by unscrewing two M8x30 Pan head screws.
(2) Separate Vise screw from Vise plate. And remove Shoulder pin 10-16 (
Fig. 7)
.
Screw guide
M8x30 Pan
head screw (2pcs.)
1. Remove M8x30 Pan head screws (2pcs.)
and Chain.
Vise screw
Vise plate
Shoulder pin 10-16
Retaining ring S-16
Shoulder pin 10-16
Vise plate
4. Push Vise plate to the hole
for removing Shoulder pin
10-16 from.
5. Separate Vise screw section from Vise plate
by removing Retaining ring S-8.
Hole for removing
Shoulder pin 10-16
Retaining
ring S-8
Screw guide
Vise screw
Vise plate
Retaining ring S-8
Flat washer 8
Pay attention
not to lose Flat
washer 8.
Shoulder pin 10-16
Shoulder pin 10-16
6. Shoulder Pin 10-16 is removed through
the hole for removing Shoulder pin 10-16.
2. Remove Retaining ring S-16 from Shoulder pin 10-16.
3. Turn Vise plate to the position
where Retaining ring S-8 can be
easily removed.
Hole for removing
Shoulder pin 10-16
Vise plate
Chain
R
epair
P
5
/
9