P 9/ 9
Fig. D-4
W
iring diagram
[3] Before Connecting Switch to LED Circuit
Fig. D-5
[3] After Connecting Switch to LED Circuit
Lead wire holder
Fix Lead wires with Lead wire holder.
Do not cross Lead wires under Switch.
Note: Be careful not to pinch Lead wires between
Switch and the inside wall of Housing L.
Pass Lead wires through the grooves.
Route Lead wires in this space.
Note: Be careful not to put Lead wires on the rib.
Connect Flag connectors with Terminal and Switch
as illustrated to right.
rib
rib
groove
Housing L
T
erminal
Switch
DC Motor
T
erminal
Switch
DC Motor
Put Connectors on Lead wires.
Put the slack portion of LED Circuit lead wires in this space.
Pass Lead wires between the pin and the inside wall of Housing L.
Put the slack portion of Switch lead wires in this space.
Note: Be careful not to put Lead wires on the rib.
Also be careful not to allow Lead wires to contact the edge
of DC Motor or Terminal of DC Motor.
Flag connector
Terminal
pole mark (+)
pole mark (-)
Switch
black
red
M1
M2
Connector
Terminal of DC Motor
pin
