15 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
LS1019
LS1019L
Blade diameter
European countries
260 mm
Countries other than Europe
255 mm - 260 mm
Hole diameter
European countries
30 mm
Countries other than Europe
25.4 mm
Max. kerf thickness of the saw blade
3.2 mm
Max. miter angle
Right 60°, Left 60°
Max. bevel angle
Right 48°, Left 48°
No load speed (RPM)
3,200 min
-1
Laser type
-
Red Laser 650 nm, Maximum output
1.6mW ( Laser Class 2M )
Dimensions (L x W x H)
805 mm x 644 mm x 660 mm
Net weight
26.1 kg
26.3 kg
Cutting capacities (H x W)
Miter angle
Bevel angle
45° (left)
0°
45° (right)
0°
42 mm x 310 mm
58 mm x 279mm
68 mm x 310 mm
91 mm x 279 mm
29 mm x 310 mm
43 mm x 279 mm
45° (right and left)
42 mm x 218 mm
58 mm x 197 mm
68 mm x 218 mm
91 mm x 197 mm
29 mm x 218 mm
43 mm x 197 mm
60° (right and left)
-
68 mm x 155 mm
91 mm x 139 mm
-
Cutting capacities for special cuttings
Type of cutting
Cutting capacity
Crown molding 45° type
(with crown molding stopper used)
168 mm
Base board
(with horizontal vise used)
133 mm
•
Due to our continuing program of research and development, the specifications herein are subject to change without notice.
•
Specifications may differ from country to country.
•
Weight according to EPTA-Procedure 01/2014
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
DOUBLE INSULATION
Wear safety glasses.
To avoid injury from flying debris, keep hold
-
ing the saw head down, after making cuts,
until the blade has come to a complete stop.
1
2
3
When performing bevel cut, first turn the
knob counterclockwise and then tilt the
carriage. After that, turn the knob clockwise
to tighten.
When performing slide cut, first pull car
-
riage fully and press down handle, then
push carriage toward the guide fence.
Hold down the releasing button when tilting
the carriage to the right.
Engage the stopper lever when cutting a
base board in 45° miter angle.
Do not place hand or fingers close to the
blade.
Never look into the laser beam. Direct laser
beam may injure your eyes.
Содержание LS1019
