Makita LS0714L, Инструкция по эксплуатации

Страница: 22 / 132

22
In the case of left bevel cut
Table (A)
006361
Table (B)
006362
Example:
In the case of cutting 52/38° type crown molding for position (1) in Fig. 41 & 42 :
• Tilt and secure bevel angle setting to 33.9° LEFT.
• Adjust and secure miter angle setting to 31.6° RIGHT.
• Lay crown molding with its broad back (hidden) surface down on the turn base with its CEILING CONTACT EDGE
against the guide fence on the saw.
• The finished piece to be used will always be on the LEFT side of the blade after the cut has been made.
In the case of right bevel cut
Table (A)
006363
Table (B)
006364
Molding position
in Fig. 41 & 42
Bevel angle Miter angle
52/38° type 45° type 52/38° type 45° type
For inside corner
(1)
Left 33.9° Left 30°
Right 31.6° Right 35.3°
(2)
Left 31.6° Left 35.3°
For outside corner
(3)
(4) Right 31.6° Right 35.3°
Molding position
in Fig. 41 & 42
Molding edge against guide fence Finished piece
For inside corner
(1)
Ceiling contact edge should be
against guide fence.
Finished piece will be on the Left
side of blade.
(2)
Wall contact edge should be against
guide fence.
For outside corner
(3)
Finished piece will be on the Right
side of blade.
(4)
Ceiling contact edge should be
against guide fence.
Molding position
in Fig. 41 & 42
Bevel angle Miter angle
52/38° type 45° type 52/38° type 45° type
For inside corner
(1)
Right 33.9° Right 30°
Right 31.6° Right 35.3°
(2)
Left 31.6° Left 35.3°
For outside corner
(3)
(4) Right 31.6° Right 35.3°
Molding position
in Fig. 41 & 42
Molding edge against guide fence Finished piece
For inside corner
(1)
Wall contact edge should be against
guide fence.
Finished piece will be on the Right
side of blade.
(2)
Ceiling contact edge should be
against guide fence.
For outside corner
(3)
Finished piece will be on the Left
side of blade.
(4)
Wall contact edge should be against
guide fence.