6
1. Switch lever
2. Handle
3. Lock off lever
• To start the device, first slide the lock-off lever in the
direction of the arrow in the figure, and then squeeze in
the switch lever. To stop the device, release the switch
lever. When the switch lever is released, the lock-off
lever will return automatically to the locked position,
and the switch lever cannot be turned ON.
1. Mowing/Lapping
Flip Switch
• Open the switch cover on the main unit to reveal a
mowing and a lapping flip switch. To mow the lawn,
press the “Mowing” side of the switch. To lap the
blades, press the “Lapping” side of the switch.
Over Current Relay (motor protection
mechanism)
WARNING:
To restore over current relay, always make sure the
Power Switch is OFF, and then press the Recovery
Button.
• If the Recovery Button is pressed while the Power
Switch is ON, the device will start moving
suddenly, which may cause an accident.
When removing an object that is jamming the
blade, always unplug the power cord from the
power socket, and put on gloves, before
unblocking.
• Failure to do so may cause injury.
1. Over current
relay
• If the electric lawn mower is used while grass cuttings
and other dirt are blocking the inside of the main unit,
the over current relay will operate, automatically
stopping the device. In such cases, unplug the power
cord from the power socket, clean out the material
causing the blockage, press the Recovery Button, and
then restart mowing.
• Be sure to press the Recovery Button at least ten
seconds after the device has stopped.
NOTE:
• The over current relay may be activated when wet or
long grass gets caught up inside of the main unit.
Connecting Extension Cord (available in
market)
WARNING:
When connecting extension cord to the power supply
cord, make sure the Power Switch is OFF and the
cord is unplugged from the power socket.
• If the power connection is made with the Power Switch
ON, the device will start operating suddenly, which may
cause an accident.
• When connecting the extension cord to the power plug
of the main unit of the device, be sure to insert the
cord’s plug fully.
1. Hook
2. Extension cord
• When connecting the extension cord, hook it over the
support hook as shown in the figure, to prevent
inadvertent unplugging, but make sure there is no
excessive strain on the plug connection.
Waist Hook for Power Cord
CAUTION:
Do not attach any item other than the extension cord
to the holder section of the waist hook for power
cord.
• Using the waist hook for power cord for purposes other
than intended may cause an accident and/or injury.
1. Hook
2. Waist hook
3. Holder
1
2
3
1
1
1
2
1
2
3
