R
epair
P 5 / 20
< 5 > Removing blade case section
1. Remove living knife. See Fig.3-1.
2. Remove lever 54, support plate and pipe 9-126. See Fig.3-1.
The pipe 9-126 removed in this step, is used as a jig for removing rod 16 which functions as a pivot for blade case.
3. Loosen lever 54 and press table support down to the surface of blade case. See Fig.3-2.
Hex flange
head bolt M8x20
Living knife
Support plate
Pipe 9-126
Lever 54
Fig.3-1
Fig.3-2
Rod 16
Table support
Lever 54
Guard holder
Pan head
screw M5x16
Guard
Table support
4. Remove two M5x16 pan head screws. Now guard with guard holder can be removed from blade case. See Fig.3-3.
5. Remove hex socket button head screw M6 (adhesive type), flat washer 7 and ring 7. Now the linkage of link plate with
arm complete has been disconnected. See Fig.3-4.
6. Remove stop ring E-5, flat washer 6 and ring 6. then, link plate can be removed from blade case. See Fig.3-5.
Blade case
Blade case
Fig.3-3
Fig.3-4
Link plate
Arm complete
Hex socket button
head screw M6
Flat washer 7
Ring 7
Fig.3-5
Ring 6
Flat washer 6
Stop ring E-5
Link plate
